Nettan Solutions

Devices

DIRIS Digiware A-100/200


• Designed and built in the USA with local stock. • cULus listed, 600V CAT III rating for voltage measurement and power supply according to UL 61010-1 electrical safety standard
• All-in-one with native & universal communication + I/O, providing a cost-effective answer to all application requirements
• Compatible with Socomec RJ12 solid-core, split-core and Rogowski coil smart current sensors
• PreciSense technology provides industry leading class 0.5 system accuracy (CTs included) which exceeds revenue grade standards for reliable and repeatable measurements under all operating conditions
• The DIRIS A-200 provides waveform capture upon power quality events (sags, swells, interruptions and power cycles). Export of waveform and samples in .csv format is done from the embedded webserver
• Up to 700 waveform captures can be stored
• Advanced cybersecurity features in compliance with IEC 62443, to protect the confidentiality, integrity and availability of data and increase resiliency to potential cyber-attacks
• Average values (trends) for 150 days with a 15-min reading interval
• Demand profiles for 1 year of with a 15-min reading interval
• Consumption curves for 1 year with a 15-min reading interval
• 700 waveform captures and 1500 events
• TOU management will full calendar configuration of up to 4 seasons and 4 rates to vizualize and align consumption to any utility contract
• Measurement alarms with user customizable under/over thresholds can be created on all measurements
• Real time alerts via email in case of abnormal conditions detected
• Unique RJ12 current sensors technology allows a quick and error free connection of current sensors to the DIRIS A-100/A-200
• Using low-voltage mV current sensors, no shorting blocks are needed, they can be disconnected safely under load

DIRIS Digiware D-70


• With DIRIS Digiware D-50 and D-70 remote displays, you can show data locally from DIRIS Digiware modules and centralise 24 VDC power and communication at a single point
• The D-50 and D-70 displays also act as the Ethernet gateway for all the devices connected on the Digiware or RS485 bus, and have an embedded web server to configure the network parameters and remotely display measurement data
• Bluetooth connectivity for gathering and viewing data from environmental sensors
• Added memory for connected devices
• Automated export of data to the FTP(S) server
• Email notifications if there is an alarm on one of the connected devices (SMTPS)
• Automated updates on all the system devices via SNTP

SOCOMEC WATTNODE


• The new WND-WR-MB provides over fifty electrical measurements over a Modbus RTU RS-485 network
• Designed as a universal line-powered meter, it works on any utility service from 100 to 600 Vac, single or three-phase, wye, or delta
• The WND-WR-MB has the same dimensions as its WattNode Modbus predecessor but its expanded register map provides many unique features not previously offered in the submetering market
• New registers include fast power for export limiting, registers to correct wiring errors remotely, potential transformer ratio for 4160 Vac and higher utility services, and SunSpec compliance
• Measures 100 to 600 Vac single-phase or three-phase, wye or delta
• Line powered from 100 to 600 Vac, line-neutral or line-line
• Correct wiring errors remotely
• PT ratio register for use with potential transformers
• Current transformer disconnect detection
• Modbus RTU, RS-485
• For use with safe low voltage (0.333 Vac) CTs to 6000 amps
• Nine baud rates from 1.2K up to 115K
• SunSpec compliant register list

Janitza UMG604E PRO


• Remplacements pour les compteurs d'énergie analogiques et numériques
• Collecte et analyse des données sur la consommation
• Surveillance continue de la qualité de l'onde électrique
• Gestion des centres de coûts, affectation des coûts énergétiques
• Éviter les hauts de puissance coûteux et même dangereux
• Passerelle Ethernet pour sous-mètres
• Supervision locale et longue-distance des installations et des procédés
• Protection des réseaux électriques

Janitza UMG605 PRO


• Continuous monitoring of the power quality e.g. EN 50160
• Ethernet gateway for subordinate measurement points
• Analysis of electrical faults for network problems
• Monitoring of the internal distribution network according to IEC61000-4-7, 4-15, 4-30
• Report generator for EN 50160 analysis
• Flicker measurement, Pst and Plt
• Control tasks, e.g. depending on achieved measured values or limits
• Transducer for building automation or PLC systems

Janitza UMG509 PRO


• Monitoring of a wide range of electrical and energy parameters
• Continuous monitoring of the power quality parameters
• Ethernet-Gateway for subordinate measurement devices
• Analysis of electrical faults and root cause analysis in case of power failures
• Cost center management
• Remote monitoring for real estate management
• Usage in test facilities (e.g in universities)

Janitza UMG512 PRO


• Continuous monitoring of the power quality e.g. EN 50160
• Ethernet gateway for subordinate measurement points
• Analysis of electrical faults for network problems
• Monitoring of the internal distribution network according to IEC61000-4-7, 4-15, 4-30
• Report generator for EN 50160 analysis
• Remote control

Dranetz HDPQ XPLORER


• Portable and IP65 SP Versions Available
• Mobile Apps
• Remote Wireless Communications
• Large 7″ Viewing Screen (Portable Only)
• Power From the Phase (SP Versions Only)
• Compliant with Today’s Safety Standards

Dranetz PG4400


• 3-Phase Power Monitor with Lightweight Design
• Color Touch Screen
• Equipped with 8 independent channels
• Automated setups
• Users can select the length and mode of data collection

AEMC 3945B


• Three-phase power quality analyzer
• Compact and shock resistant
• Three current and four voltage input terminals are provided
• It is IEC 61000-4-30 Class B
• Safety rated to 600V CAT IV

Fluke 190M


• Two or four electrically-isolated inputs
• Fast sampling rate
• 10,000 samples per channel waveform capture
• 5000 count digital multimeter in two-channel model
• Quad meter measurements via scope BNC inputs in four channel model
• Frequency spectrum using FFT-analysis
• Smart averaging

NSCOM-ION8650 with Service Signature Hydro-Quebec


• Realtime data for Schneider ION8650
• Records data for Schneider ION8650
• Compatible Apple, Androids, Windows, Linux...
• Custom alerts
• Remote commissionning
• WiFi

NSCOM-ION7650


• Realtime data for Schneider ION7650
• Records data for Schneider ION7650
• Compatible Apple, Androids, Windows, Linux...
• Custom alerts
• Remote commissionning
• WiFi

NSCOM-PXM2000


• Realtime data for Eaton PXM2000
• Records data for Eaton PXM2000
• Compatible Apple, Androids, Windows, Linux...
• Custom alerts
• Remote commissionning
• WiFi

Contact us!


Nettan Solutions Inc.
7577A Edouard St.
LaSalle, QC, Canada
H8P 1S6
P: (514) 365-5888
E: info@nettan.ca